Makers, developers and hobbyists looking for a dual output USB step ... I wanted a simple breadboard power supply that could power my standard 3.3V / 5V digital circuits such as a microcontroller ...

Their benefits are such that it’s become surprisingly rare to see a traditional linear power supply with a mains-frequency transformer and rectifier circuit, so [ElectroBoy]’s dual voltage PSU ...

GD25NE combines 1.8 V core voltage with 1.2 V I/O to eliminate boost circuit and delivers higher ... has unveiled the GD25NE series of dual-power supply SPI NOR Flash, designed specifically ...

Hi, <BR><BR>I have acquired a second-hand Tyan S2985/K8WE dual socket 940 board, powered by a new PC Power&Cooling 610W EPS 12v power supply ... It's a single rail. Could a dual rail design ...

Power supply circuits come in the form of voltage step-up (boost ... Figure 3 shows an isolated buck topology to generate a dual +VOUT rail. Figure 3 Isolated buck topology to generate a dual + VOUT ...

The second method is to use a split- (or dual-) power supply, shown in Figure 1(b), which ... a 10 μF bypass capacitors on each power rail of U3 has been left off. Figure 5: LDO tracking circuit with ...

But remember that it is an analog block, so it needs a stable on-chip power supply in order to provide a stable output. There is some area overhead for adding dual rail functionality in the memory.

The RDK-203 reference design kit from Power Integrations includes a dual-rail power supply with high loop bandwidth ... increasing audio quality. The RDK circuit consumes less than 0.9 W at ...

and provides a negative rail output for total loads below 20A, beyond which separate external connections are required. Outputs are protected against over-current, short-circuits and input ...